HomeBusinessNew mobile antennas ready for 5G revolution

New mobile antennas ready for 5G revolution


The latest mobile phone technology, 5G, will bring data transmission that is up to 100 times faster than with LTE (4G), reaching wireless data transmission speeds of up to 20 Gbit/s. It will provide rail operators with the possibility of providing passengers with high-quality real-time travel information as well as interruption-free Wi-Fi, including the most demanding of video applications.

However, operators will have to invest in new onboard communications equipment.

To meet this demand, TE Connectivity is already supplying onboard antennas, for mounting outside on vehicle rooftops and on inside ceilings, that are ready for 5G, which is now beginning to be rolled out all around the world.

TE Connectivity manufactures a range of 5G-compatible
antennas for use inside and outside trains.

New wideband MiMo (multiple-input and multiple-output) rooftop antennas have been designed by TE specifically for use in 5G communications on overground and underground trains, as well as metros, trams and buses. Different versions incorporate one or two antenna elements for MiMo operation, providing a very large frequency response ranging from 698MHz to 6,000MHz. The antennas are also suitable for legacy communications (2G/3G/4G), Wi-Fi, WiMax and GNSS (including GSMR).

The new antennas meet the EN 45545-2 standard covering fire performance of materials and components for trains, as well as EN 50155, which covers various aspects of electronic equipment used in railway rolling stock. They also conform to IP69 relating to protection against dust and water, which means they even resist high-pressure water jets.

DC-grounded antenna elements in the rooftop antennas provide voltage protection in case of catenary line drop up to 40kA, 100ms. An internal ground plate allows the antenna to be mounted on non-conductive surfaces.

The ceiling-mountable, circular, onboard Wi-Fi antenna offers up to 4×4 MiMo Wi-Fi coverage. With a frequency response range from 2.4 to 2.5GHz and 4.9 to 6GHz, the antenna is ready for the IEEE 802.11ax standard, which should be fully deployed later this year. Offering data throughput at least four times faster than earlier antennas in congested environments, together with 40 per cent higher peak data rates, this antenna has a low-profile height of just 30 mm. It is supplied with flame retardant CS23 coax cables (EN45545 compliant), its white radome is also flame retardant, and it can be mounted on a non-conductive surface.


Please enter your comment!
Please enter your name here

- Advertisement -

Latest news

Rail engineers strike gold in sustainability school

Multidisciplinary engineering business Dyer & Butler has earned Gold level status from the Supply Chain Sustainability School (SCSS). This is the highest level of membership...

Tunnel operation takes flight with help from a helicopter

Essential work on a tunnel in the Peak District got some help from high places. Helicopters helped airlift construction materials into position as part of...

Island Line to re-open this autumn

South Western Railway has said that the Island Line is set to reopen on 1 November. The upgraded line’s reopening is subject to a final...
- Advertisement -

More news

Rail review author calls for rail fares reform

Keith Williams, co-author of the Williams-Shapps Plan For Rail white paper, has urged for fares reform – arguing there has never been a better...

Iconic arrows get a dash of green ahead of environmental summit

The famous National Rail double arrow has turned several shades of green ahead of the COP26 UN climate summit, which takes place in November. The...

Digital signalling for East Coast main line tested on Thameslink

A test of the digital in-cab signalling system ECTS level 2 (European Train Control System) has been carried out successfully using a Govia Thameslink...